METERMIX SYSTEMS PTE LTD (MSPL) is a technical consulting firm specializing in meter-mix-dispense applications and related machineries. It is also an authorized distributor for GRACO OHIO INC. GRACO OHIO INC was formerly known as LIQUID CONTROL CORP (LCC) before it was acquired by Graco in 2006.

MSPL was originally established in 1999 by KK LEONG as a distributor for LCC’s meter-mix-dispense machines (for two-part materials) and positive displacement valves (for one-part materials). Since then, it has developed expertise in customized configurations for these machines. These machines process various materials including two-part silicones, polyurethanes, epoxies and methacrylates.

We have sold, serviced and installed hundreds single-component and two-part meter-mix dispensing machines since 1999. These machines operate mostly in Southeast Asia. They serve a range of industries, from automotive components, electrical appliances, LED manufacturing, medical components to hard disk drives. The materials dispensed by these machines can vary significantly.

These variations include the followings:

Type of material (silicone, polyurethane, epoxy, methacrylate). Different material has different chemical compatibilities to the materials used to construct the machine.

Material viscosity which can range from a few centipoises (cps) to a million cps.

Fillers type and composition in material. Fillers can range from talc /calcium carbonate (none abrasive) to aluminium oxide (highly abrasive).

Volumetric or weight mix ratio. Ratios can vary from 1:1 to 20:1.

Pot life (usable life) of material upon mixing.

Shot size (amount in gm or cc) that the customer wants to dispense.

Packaging type. Material can come in 1 gal can, 5 gal pail or 55 gal drum, etc.

Dot, bead or potting application.

Manual or automated application. Automation requires electrical interface between the meter-mix-dispense machine and the automated X-Y-Z workstation.

Each machine has to be specified and configured to suit your particular application. Actual operating performance is critically dependent on proper specification/configuration, which is the job of the distributor/ consultant. The end user has almost no recourse if the machine is poorly configured. Therefore, it is crucial that the distributor/consultant has the requisite experience for the job at hand.

“I have personally seen a significant number of poorly specified & configured machines, which have caused substantial losses to machine owners”.

If you have a project, you will need an experienced company to configure a machine that will work for you. That company would be us. YOU CAN HOLD US RESPONSIBLE IN PROVIDING A SOLUTION THAT WILL WORK! Please contact us if you have a meter-mix-dispense project.